INSTEK GFG-8216A REPAIR and INSTEK GFG-8216A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the INSTEK GFG-8216A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the INSTEK GFG-8216A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Function Generator?
Shop for Comparable Products on our  used Function Generator page or new Function Generator page

 
   INSTEK GFG-8216A   Description / Specification:   Spec Sheet 
INSTEK GFG-8216A 3 MHz Function Generator w/Counter

The Instek GFG-8216A 3 Mhz Function Generator With Counter output waveforms are Sine, Triangle, Square, Ramp, TTL and CMOS. It has External Voltage Controlled Frequency (VCF) Function, Duty Cycle Control with Signal Inversion Capability, Variable DC Offset Control and a Two-Step (-20dBx2) and Variable attenuator. The Instek GFG-8216A has a built-in 6 Digit Counter with INT/EXT Function up to 150 MHz. Specifications. Frequency Range: 0.3 Hz to 3 MHz (7 Range). Amplitude: > 10 Vpp (into 50 ohm load). Impedance: 50 ohm ±10%. Attenuator: -20 dB ±1 dB x 2. DC Offset: <-5V to >5V (into 50 ohm load). Duty Control: 80% : 20% : 80% to 1MHz Continue variable. Sine Wave Distortion: <=1%, 0.3 Hz to 200 kHz THD <=35 dB below fundamental in all range (Specification applied from MAX. to 1/10 level). Sine Wave Flatness: < 0.3 dB, 0.3 Hz to 300kHz, < 0.5 dB, 300 kHz to 3 MHz. Triangle Wave Linear: >= 98% 0.3 Hz to 100 kHz, 95% 100 kHz to 3 MHz. Square Wave Symmetry: ±2%, 0.3 Hz to 100 kHz. Square Wave Rise or Fall Time: <= 100 nS at maximum output (into 50 ohm load). Frequency Counter Range: 0.3 Hz to 3 MHz (5 Hz to 150 MHz EXT.) Frequency Counter Accuracy: Time base accuracy 1 count.



 

Standard Calibration $115.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the INSTEK GFG-8216A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Averaging
Averaging is a mathematical process to reduce the variation in a measurement by summing the data points from multiple measurements and dividing by the number of points summed.

Fall Time
Fall time is the time required for the amplitude of a pulse to decrease (fall) from a specified value (usually 90 percent of the peak value exclusive of overshoot or undershoot) to another specified value (usually 10 percent of the maximum value exclusive of overshoot or undershoot).

Noise Density
Noise Density is the amount of noise within a defined bandwidth, usually normalized to 1 Hz.

Resolution Bandwidth (RBW)
Resolution Bandwidth (RBW) is the minimum bandwidth over which you can separate two signals and still see them.

Please contact us for your INSTEK GFG-8216A REPAIR and/or INSTEK GFG-8216A 3 MHz Function Generator w/Counter CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: